The Reasons Key Repair Isn't As Easy As You Imagine

The Reasons Key Repair Isn't As Easy As You Imagine

How to Do a Broken Car Key Repair

You're headed to work, in rush, and put your keys to your car in the ignition. You try to turn the key, but it snaps in the lock.

There are a few things you can try to fix the issue before calling an expert locksmith. Here are a few quick fixes:1. Super Glue.

1. Contact an expert locksmith

A damaged key in the lock is among the most unpleasant things a vehicle owner could experience. This can be particularly frustrating if the driver is trying to get somewhere, or drop off an infant. In this case it is crucial to act swiftly and try to free the stuck key.

Contacting a professional locksmith is the best choice, as they'll have the right tools and know how to take out the keys broken without damaging the lock. Many people will have a look around their car for something thin and rigid such as a paperclip or toothpick, but this typically won't work since it's too thick to enter the lock.

The best option is to use a pair of tweezers. They are small and can easily reach inside the lock. They should be able to grasp the broken piece of a key, and then pull it out. If you don't have tweezers, then it may be worth trying to locate a set of key extractors that are often sold in auto parts stores. They are narrow, flat and have small hooks. They can be put into the keyhole and then take the broken portion of the key.

A magnetic key hook can be used to attach to the metal inside the lock, and then remove it. This is not always a good option since it is possible for it to get caught under the lock and cause further damage to it. In such a situation it is recommended to call an expert locksmith.

Some people attempt to glue together the two pieces of a damaged car key with superglue in order to take it out of the lock. This can be dangerous since the metal pieces may tangle and break later. It is important to not turn the key, as it could cause further damage to your lock or ignition cylinder. Contact a professional locksmith to replace the broken key immediately.

2. Drill a hole

Sometimes a key is broken inside the lock, and even with a spare, you might not be in a position to gain access to your vehicle. In these instances drilling out the lock is the best choice.

You will first want to ensure that the keyhole is positioned to accept a basic tumbler key. If it's not then you won't be able to drill out the pins without damaging the door and potentially destroying the lock mechanism.

It is important to note that you'll be drilling through the outer layer of plastic as well as an inner metal layer. A small drill bit is sufficient to cut through these layers, but it is important to be sure not to go any deeper than this. In the event of drilling too deep, it could cause damage to the wiring harness, or cause the drill to snag.

key repair near me  is also recommended to wear a mask and protective gear when working with a drill. This will stop dust and dirt from getting into your lung.

It is also recommended to have a pair of pliers and tweezers available in case the damaged piece of the key is sticking out of the lock. If there is enough of the key to grip with tweezers or pliers, this could be sufficient to get it out of the lock. If there isn't, however you'll need to use a tool such as this one to encase the tool into the lock and then rotate it towards the key to grasp it and pull it out of the hole.

3. Drill a nail

If you smash your car key in half, it could cause you to be trapped. There are a number of options to fix the issue without having to pay an locksmith. The first thing you can do is to use screws or nails. They are available in your house or at the hardware store. It is recommended to pick nails that are as thin and long as possible. This will allow you to fit it into the hole and then use epoxy to connect the two parts together. It is also good to make sure the back of the nail is flat. This will make it easier to fit into the cut slot of the key. This will prevent it from moving and breaking in the future.

4. Super Glue

A lot of motorists resort to DIY techniques such as using super glue to attempt to fix a damaged car key, but this is not a safe way to go. You could end up ruining the lock and needing to pay more for getting a replacement from the dealership or a locksmith.

You must examine the broken keys first and make sure they are of the same size. This step is essential to ensure that all pieces that have been glued are aligned correctly and that the key will fit in the lock after they've been joined. After that, you can use a piece of sandpaper with fine-grit or a metal file to smooth out the edges on the broken pieces of the key. This will strengthen the glue's bond and decrease the likelihood of a future loose key.


After finishing the edges, apply the smallest amount (about the size of a pea) of super glue on one end. Only apply tiny amounts of super glue, since too much could make the key too heavy. It will then be difficult to fit into the lock. After lining up the two pieces of the key that broke and pressing them together, you can press them. After a short time the glue will begin to set and join together the key fragments.

Another common household item that can be used to help extract a broken car key is a bobby or paperclip pin that can be made into a pick-like tool, then inserted in the lock. This method is particularly helpful when the damage is close to or within the keyway or lock hole.

A car key that has been damaged with electronic components will need a new key from a dealer or a professional locksmith. This is because the key will need to be programmed with a new code and the chip needs to be replaced. If the shell or metal part of the key is damaged it will be necessary to replace the cut. It is not necessary to reprogramme or replace the electronic components.